Everredtronics  

English

EVERRED Thermoelectric Module PRODUCTS TECHNICAL INFO FAQ CONTACTS  
 
 
PRODUCT NAVIGATION
Thermoelectric Peltier TES
Thermoelectric Peltier TEC1
Thermoelectric Peltier TEC2
Max. 200C Peltier module
Thermoelectric Seebeck TEG
Thermoelectric P & N Type
Heatsinks & Fans
Thermal Grease
CONTACT US
 

GUARANTEE

Rohs
All our Products are RoHs compliant

 

 


EVERREDTRONICS LTD.
2# Building, No.89 Julian Road,Shanghai,201907,China
Tel: +86 (21)6049 5160
Fax: +86 (21)6531 1544
sales@everredtronics.com

>> Thermoelectric Seebeck Generator-TEG

A thermoelectric generator relies on the "thermoelectric effect" to convert heat directly into electricity. It is a solid state device with no moving parts and so it is completely silent and extremely reliable. Due to the high reliability of thermoelectric power supplies they have been used for years to provide electrical power in space missions where solar power is not available. Two examples of the many space missions that have relied on thermoelectric power supplies are the "Voyager" that was sent into deep space and has operated successfully for more the 20 years and the "Apollo" lunar missions where thermoelectric power supplies powered equipment that was left behind for more than a decade.                                                                                 -----Hi-Z Technology

Everredtronics starts TEG developing since 2005, and we have a independant team specially created from our conventional TEC dept and joined by materials & thermal-electricity field professors from Fudan University and Central South University, After years exploring, we become the professional manufacturer in the thermoelectric generators industrial, our TEGs are grouped by 2 categories by max. operating temperature/max. Th temperature:

  • Max. 210 Celsius Degree/ 410F / 483.15K / 869.67Ra
  • Max. 320 Celsius Degree/ 608F / 593.15K / 1067.67Ra
  • Max. 210 Celsius Degree/ 410F / 483.15K / 869.67Ra
     The following specification are based on that the hot side temperature is at 200℃ and cold side at 50℃.
TEG P/N Length Width V/K Open circuit V Matched load Ohm Match output Voltage Match output Current A Match output Power W

Heat Flow through module W

Efficiency
TEG031-40E 40 40 0.03919 6.00 5.2 3.5 0.58 2.0 48.6 4.11%
TEG071-30C 30 30 0.03967 6.10 4.8 3.1 0.55 1.8 47.2 3.81%
TEG127-40A 40 40 0.02853 4.28 1.6 1.8 1.25 2.4 56.4 4.25%
TEG127-50A 50 50 0.03500 5.20 1.1 2.5 2.15 5.4 120.3 4.49%
TEG127-62A 60 60 0.04667 7.00 2.2 3.9 1.6 6.2 119.1 5.20%
  • Max. 320 Celsius Degree/ 608F / 593.15K / 1067.67Ra
     The following specification are based on that the hot side temperature is at 300℃ and cold side at 50℃.
TEG P/N Length Width V/K Open circuit V Matched load Ohm Match output Voltage Match output Current A Match output Power W

Heat Flow through module W

Efficiency
TEG126-30A 30 30 0.03963 9.91 5.3 5.1 0.97 4.9 120.4 4.01%
TEG126-40A 40 40 0.03963 9.91 5.3 5.2 0.98 5.0 120.4 4.01%
TEG126-60A 56 56 0.03111 7.78 1.6 4.0 3.36 13.2 338.0 4.01%
TEG241-60A 56 56 0.06519 16.3 4.1 8.5 1.96 16.5 362.0 4.49%
TEG126-30B 30 30 0.03333 8.33 2.5 4.4 1.52 6.7 144.4 5.20%
TEG126-40B 40 40 0.02667 6.67 1.7 3.58 1.9 6.8 137.0 4.82%
TEG126-60B 56 56 0.03111 7.78 0.8 4.12 4.4 18 357.4 5.00%
TEG241-60B 56 56 0.05333 13.3 2.3 7.0 2.84 19.7 387.0 5.01%
Customer Testing Images    
TEG Test graph TEG TEST.1 TEG.Test.2
Important

Test indicates that the TEGs share the same characteristics with batteries, when connected in series, Voutput=VTEG1 + VTEG2
when in Parallel, VTEG1=VTEG2 (Note: Connect the same TEG under the same circumstance)
so, to achieve higher Output Voltage or current, you could use such features or DC-DC converter.

                                                                                                                                                  Contact our representative or use the Inquiry Form.

 

EVERRED Lighting EVERRED Thermoelectric Module PRODUCTS  
Copyright @ 2006-2012 EVERREDtronics Ltd. All rights reserved.
Any copying, distribution, re-transmission or publication is strictly prohibited without the written consent of the Company.